school auditorium seats -RT99604

very stylish and high quality school auditorium seats and school auditorium chairs

we are one of experience good school auditorium seats company and school auditorium chairs and school auditorium seating manufacturers in Turkey. You will be the architect of each product, and you can make many changes to the products. For example, such as cinema seats and seating groups, sofa sets cannot be changed. Because basically it is spongy products, plastic parts and other parts made in steel molds. But furniture or other types of products, such as allowing you to change sizes or shapes in accordance with the request of the client. However, in groups of seats, you can also make changes in size and shape, but it will be little bit expensive and should be a bulk order.

For school auditorium chairs -RT99604 before production in factory and we need your approval

Production should be well planned otherwise production does not accept mistakes, it is an irreversible way, small mistakes are possible to cause big costs, therefore it is of great importance to discuss and understand every detail with the customer in advance. 

Before the molds are prepared, the models of the school auditorium seats must be fully created in the computer environment, and it is necessary to pay attention to the ergonomics, appealing to the eye, and designing them as a whole in golden proportions. Coming to make the bench mold of the modeled school auditorium chairs, Since school auditorium seats are the products of a single type of molds, special molds and molds must be made for each product, the preparation processes of these molds may take different times depending on the complexity of the model. 

These molds, in which the pouring sponges of the products will be printed, were manufactured in metal in the past, but nowadays these molds are usually made of fiberglass. The fact that it is fiberglass has made the preparation of the molds a little faster compared to metal molds. These patterns are firstly created in the computer environment in accordance with the school auditorium chairs model to be made. then the molds that will give the seats their own shape are started to be manufactured. 

Now it’s time to manufacture the seat and backrest sponges that will make up the school auditorium seats. The internal structures of these seats and backrests must consist of metal skeletons. Non-metal internal structures, some other companies are making plastic to reduce the cost, but this is a non-durable system that will break in a short time. For this reason, we only use metal skeletons for the inner parts of the sponges. The metal skeletons are formed by welding in accordance with the seat model and these metal skeletons are placed in the previously prepared fiberglass molds. After these processes, the last step that forms the sponge is left.

The hot liquid, which is formed by combining two different chemicals with a fully automatic machine and turning them into liquid form, is poured into the previously prepared molds via the arms of the machine. After this process, the holes of the molds are closed with a metal stopper and this liquid must be waited for a while to cool and swell while cooling. After waiting for about 5 minutes, our sponge is ready, the covers of the molds are opened, and these sponges, whose production process is finished, are taken out and delivered to other production units.

The prepared sponges are covered in the upholstery unit in the form of leather or fabric previously selected by the customer. Wooden cover or plastic back covers are created in accordance with the customer’s request, and now the products with upholstery and back cover meet with the feet. After the fabric upholstery process is completed, the legs of the school auditorium chairs are prepared according to the customer’s demands, these legs can be prepared in many different appearances as closed arm metal leg, open arm metal leg, or interior non-metallic wood veneer.

After the entire production process is over, the packaging process of the products begins, the products are packed as backrests and seats, the feet of the products, bolts and screws are packaged separately. The leftover products are transported to warehouses or logistics centers to be delivered to the customer.

For school auditorium seats -RT99604 at low price and good quality 

We are in this industry more than 16 years. We are very proud that many successful projects have been completed by our company. Mostly we exported our products to many countries. What makes us happy is that we have always received positive feedback from our customers. We have innovated modern products range. All of our products have TSE certificate, we never allow the use of poor quality raw materials in our products.

What you look for school auditorium seating manufacturers we are here; Let us be one of your school auditorium seating suppliers from Turkey

Let us provide you with a turnkey service in your projects, make dimensions, prepare site drawings in accordance with our agreement, conduct a detailed study and try to make the most stylish products for you, and we are confident that you will be satisfied with our prices and quality. We always try to use materials with the highest quality and quality certificates in our products. We view the people we work with as our business partners and not as a relationship between buyer and supplier, and the details of our customers’ projects are very important to us and we manufacture with them and deliver our products there with that confidence. our customers with peace of mind, so we are committed to providing our customers with the best service, we are ready for that.